Fix Network Printer Share Errors “0x0000011b” and “0x00000709”.

Fix Network Printer Share Errors “0x0000011b” and “0x00000709” yourself at home. You have installed a USB or network printer correctly and do the sharing settings well. But when you try to connect the network printer with the computer, you receive an error like 0x0000011b Windows Cannot access and sometimes 0x00000709 operations could not be completed.

You got confused and start to diagnose the already settings. You should remember that both types of errors would occur in Windows 10 and Windows 7. These errors occurred due to Windows 10 updates which disturb the network printer for sharing. To solve this problem on Windows 7, you just uninstall the recent updates which you have done in Windows and the same process will also be done on Windows 10. Let’s start to solve this network printer share error. Learn how to install and do settings on barcode printers here.

Table of Contents

How to Fix Printer Share Problem “Windows cannot connect to the printer, 0x0000011b error?

Fix network Printer Share Errors 0x0000011b and 0x00000709 1 — Fix Network Printer Share Errors “0x0000011b” and “0x00000709”.

This error is caused by the windows updates and you have to uninstall the windows update to solve the error.

Open your control panel and click on Windows updates or simply type Windows update in the Windows search bar and open the first shown result.
Now, click on Windows update history and open it.
Now, locate and search the Windows update file “kb5005565” and click on it to select.
Now, click on uninstall button to reverse back the windows updates.

Your computer will be restarted and if not restarted, restart it manually to take effects.
Now, again go to the network and then a specific computer and click to connect to share the printer. Hope this time, it will be connected and be ready for printing.

How to Fix Printer Share Problem “Operation Could Not Be Completed “0x00000709”

When you receive the above code while sharing time then remember this is also a Windows update trouble issue, especially with update file “KB5006670” on windows 10. You have to uninstall this Windows update file KB5006670 that is causing the error 0x00000709.

When you uninstall these updates, the error will be solved automatically after restarting the computer. Normally Windows update file kb5005565 is the main cause of the error of 0x0000011b and while the Windows update file KB5006670 is the cause of the error 0x00000709. So, you have to uninstall the updates file “kb5005565 “from the windows update.

You will be doing or uninstalling from both computers, where your printer is installed and where the printer needs to be connected. When you uninstalled the windows updates, you should make the windows update disabled from both computers. I hope, it will be resolved your problem or error. Also fix the Network Error “0x80070035″.

What would be done if the above errors were not eliminated or solved?

If your problem still exists or other than these above errors, you may diagnose the further steps to solve your error and problems. Follow the below steps to diagnose and solve the issue. Learn to share USB printers on the network here.

Write the “Regedit” in the run command by pressing the combined win+R key from the keyboard.
Now, click on the “HKEY_LOCAL_MACHINE”.
Then choose the “Software“.
Now, click on “Microsoft“.
Then on “Windows NT“.
Now, click on “Current Version“.
Now, you will type and search there the “Windows” and when appeared you can click on it.
Now, right-click on the appeared tabs “windows” and then you must choose “permission“ below it.
Now, you will provide the user permission and will also add everyone user there if not available.
Do on both systems and then restart them and hope the problem is resolved successfully. But if the problem still exists do the next step.
Now, open the Run command from the keyboard and then type Regeditand then press enter key.
Now click on “HKEY_LOCAL_MACHINE.
Now, click on the “System“.
Then you have to click on the “CurrentControlSet“there.
And finally, click on the “print“.
Right-click on the right side and create a 32-bit dword value and name it “RpcAuthnLevelPrivacyEnabled”. Now, modify its value data as 0. If your Windows has a 64bit operating system, then you will create a 64-bit DWord value.
Now, close it.
Now, search “Services “and open the services.
Search there in the services “print spooler” and click on restart the print spooler services.
It’s done OK now.
Restart your both computers and hope your issues will be resolved.